What do You Need to Flush X01 Brake

Brakes are important safety devices on your vehicle, and effective braking requires proper fluid levels and functioning brakes. Here we will discuss how to flush the X01 brake system on a Honda Civic.

What are XBreaks?

XBrakes are a type of brake that is used on some vehicles. XBrake is a trademarked name for a type of brake that uses hydraulic pressure to stop the car.

To flush an XBrake, you first need to determine what type of XBrake you have. There are three types of XBrake: manual, electronic, and PT (pedal-type). Manual XBreaks use buttons on the dashboard to activate the brakes. Electronic XBreaks use sensors to detect when you apply the brakes and will automatically activate the brakes. PT (pedals-type) XBreaks use your feet to apply the brakes.

Toflush an electronic or PTX brake, you need to remove the cover located under the steering wheel. On manual XBreaks, you will need to unscrew the wheel and remove the brake pedal assembly. Finally, you will need to remove the hoses from underneath the vehicle.

How to Flush a XBrake

If you have a XBrake installed in your car, you may need to flush it from time to time. Flushing a XBrake clears out any debris that may have collected inside the brake system. This helps to ensure optimal performance and safety.

To flush a XBrake, first make sure the car is completely stopped. Turn off the engine and the lights. Open the hood and locate the XBrake installation. Look for a black plastic cap on top of the brake system. Remove the cap by unscrewing it with a Phillips screwdriver.

Next, empty the brake fluid reservoir by pouring it into a container. Be careful not to spill any fluid onto the ground. Replace the black cap on top of the brake system and screw it onto the bottle neck.

Now you’re ready to flush the brake system. Pour about 2 cups of fluid into the reservoir. Replace all of the other caps and screws on top of the brake system. Start up the engine and drive until all of the fluid has been expelled from the system.

What does Flushing an XBrake Do?

If you’re wondering what flushing an XBrake does, it’s just a way of keeping your brake system in top condition. By flushing the brake system, you’re cleaning all the dust and debris that can build up over time. This helps to keep your brakes operating at their best, ensuring a safe stop on every occasion.

See also  Is It Necessary to Have Brake Fluid Flush

To flush your XBrake, first make sure that your car is parked on a level surface. Open the hood and look for the brake fluid reservoir. It will likely be located near the engine. Next, unscrew the cap and pour about half a cup of fluid into the reservoir. Replace the cap and screw it on tight. Don’t overfill the reservoir – too much fluid can damage your brakes.

Finally, drive your car until the brake pedal feels firm when you press it down – this indicates that the system has been flushed. If everything goes according to plan, your brakes will work better than ever after flushing your XBrake!

Pros and Cons of Flushing a XBrake

If you’re wondering whether or not it’s worth it to flush your XBrake, here are the pros and cons of doing so.

The pros of flushing a XBrake include the fact that it can improve braking performance. Flushing the brake pads can also help to prevent corrosion and build up on the pads. It can also free up extra stopping power, which can come in handy if you’re having trouble stopping on a wet road.

However, there are also some cons to flushing a XBrake. Flushing the brake pads can increase the chance of rusting and damage to the calipers. It can also be difficult to flush a XBrake if it’s clogged with dirt or dust. Lastly, flushing a XBrake may not always be necessary. If your car has been serviced recently, it may already have optimal brake performance.


If your car has an X01 brake, you may need to flush the system. This type of brake is a new design that uses a liquid instead of pad and rotor combinations. Over time, this type of brake can build up slag and corrosion on the parts, which will cause it to malfunction. In order to flush the system and restore function to the brakes, you will need to take them apart and use a degreaser or anti-corrosion fluid on all of the moving parts. Make sure to follow all safety guidelines while doing this so that you don’t damage any of the parts in the process.

DynoCar is the best place to find information on all things cars, whether it be a car buying guide or how to change your oil. We’ve made finding and staying in touch with car information easy and fast.



About Us



DynoCar - All About Cars

(440) 999 3699

590 Monterey Blvd San Francisco, CA 94127

Information contained herein is for informational purposes only, and that you should consult with a qualified mechanic or other professional to verify the accuracy of any information. DynoCar.org shall not be liable for any informational error or for any action taken in reliance on information contained herein.