How to Unlock a Car Door with A Screwdriver

Car keys can be a hassle to keep track of, especially if you lose them. In this article, we’ll show you a simple way to unlock a car door with a screwdriver.

What is a screwdriver?

A screwdriver is a tool commonly used in the automotive and home repair industries. It is a thin, metal shaft with a wide head on one end and a Phillips head on the other. The head of the screwdriver is used to remove screws from surfaces.
When you need to unlock a car door with a screwdriver, it is important to use the right tool for the job. A standard screwdriver will not work on most car doors. To unlock a car door with a screwdriver, you will need an adjustable wrench or a crowbar.
The first step is to determine which type of lock your car has. Most cars have either a keyless or keyed entry system.

If your car has a keyless entry system, you will need to remove the battery cover to access the fob. Remove the fob and place it in another location so that you do not lose it. Look for a small black box near the front wheel well that contains the keypad and buttons. The directions that came with your car should show you how to open the door using the keypad. 

How to unlock a car door with a screwdriver

If you’re ever stranded inside a locked car, there’s no need to panic. All you need is a screwdriver and some patience.

Here’s how to unlock a car door with a screwdriver:

1. Start by locating the screws that hold the door’s panels together. You’ll likely find these screws located on either side of the door near the hinges.

2. Use a Phillips head screwdriver to remove the screws. Be careful not to lose them—you’ll need them later on.

3. Once the screws are removed, gently pull the door panels apart until they’re free from each other.

4. Look for the lock cylinder (or cylindrical key) in the center of each door panel. Use a flathead screwdriver to unscrew the lock cylinder from its housing.

5. Remove the lock cylinder and store it safely away. You’ll need it later on when you re-install the door panels.

6. Re-install the door panels by lining them up along their original positions and screwing them back into place using the Phillips head screws that you saved from earlier.

What are the different types of screws?

Most car doors are secured with screws that can be accessed with a screwdriver. There are three main types of screws: flathead, Phillips, and Torx. Flathead screws are the most common type and can be accessed with a standard screwdriver. Phillips screws are smaller and require a special Phillips screwdriver to access. Torx screws are the largest type and require a Torx screwdriver to access.

See also  Book Hotel And Rental Car Together

If you don’t have a screwdriver that fits the screw, you can try to use a wrench or an allen key to turn it. If those tools don’t work, you may need to take your car to a mechanic to have the door replaced.

How to unlock a car door with a screwdriver step-by-step

If you’ve ever had to unlock a car door with a screwdriver, you know it can be a pain. But with a little practice, you can easily unlock your car door in just a few quick steps. Here’s how to do it:

1. Start by getting yourself a good screwdriver. A Phillips head screwdriver will work best for this task, because it has a wide head that can fit into tight spaces.

2. Place the screwdriver against the side of the car door where the lock is located. Make sure the blade is facing the ground so that you don’t scratch the paintwork.

3. Turn the screwdriver around so that the blade is facing the door handle and insert it slowly until you feel resistance. Keep turning the screwdriver until you hear or see the lock release.

4. Open the door and drive away safely!

Conclusion

If you’re ever locked out of your car, there’s no need to panic. With a little bit of know-how and the right tools, you can unlock your door in just a few minutes. Here are the steps you need to take:
1) Locate the screwdriver that corresponds to your make and model of car.
2) Open the driver’s side door as far as it will go, then use the screwdriver to unscrew the two screws on the inside edge of the door handle.
3) Gently pull up on the handle until it comes free from its bracket, then remove it by hand.
4) Once both screws are unscrewed, gently push in on one end of the handle so that it lines up with its new hole and screw it back in place.
5) Repeat steps 2-4 for the other door handle.

DynoCar is the best place to find information on all things cars, whether it be a car buying guide or how to change your oil. We’ve made finding and staying in touch with car information easy and fast.

Resources

Guides

About Us

Contact

Contact

DynoCar - All About Cars

(440) 999 3699

590 Monterey Blvd San Francisco, CA 94127

Information contained herein is for informational purposes only, and that you should consult with a qualified mechanic or other professional to verify the accuracy of any information. DynoCar.org shall not be liable for any informational error or for any action taken in reliance on information contained herein.