Brake fluid is one of those things that you might not think about very often, but it’s important to keep it topped up. If your brake system isn’t working properly, you could end up with a lot of expensive repairs on your hands.
What Pressure Flush Brake Fluid is and What it Does
Brake fluid pressure flushing is a common procedure for keeping brake systems operating at their best. By flushing the brake system regularly with brake fluid, we can keep corrosion and other build-up at bay and ensure that our brakes are working properly. This procedure is also necessary to flush out any air bubbles that may have developed in the system.
When to Pressure Flush Brake Fluid
Brake fluid is a valuable resource, so it’s important to know when to pressure flush it. Here are four guidelines:
1. When your brake pedal becomes stiff or you notice a decrease in braking performance.
2. When you replace your brake fluid.
3. When there’s visible contamination or rust on the brake lines or calipers.
4. Whenever the instructions say to do so.
How to Perform a Brake Fluid Pressureflush
One common problem with brake fluid is that it can become overpressurized. Overpressurization can cause the brake system to fail, so it’s important to know how to perform a brake fluid pressureflush. Here’s how:
1. Park the vehicle in a safe location.
2. Shut off the engine and remove the key from the ignition.
3. Open the hood and remove the front fascia panel.
4. Loosen the two brake fluid hoses at each end of the reservoir.
5. Using a wrench, turn the cap on top of the reservoir counterclockwise until it comes loose from the fitting on the brake pedal assembly (A).
6. Carefully pour a small amount of brake fluid into each hose until it is full (B). Be careful not to spill any fluid onto the engine or other parts of the car!
7. Replace the front fascia panel, tighten the hoses, and reattach the cap (C).
8. Restore power to the car and test drive it to check for leaks. If no leaks are found, replace any damaged components in your brake system!
When to Replace Brake Fluid
If your car has a brake fluid warning light, you may be due for a brake fluid change. Brake fluid is a consumable item and should be replaced every 3 to 6 months, depending on how often the brakes are used.
Here are four signs that you need to replace your brake fluid:
-Your car has a brake fluid warning light
-The brakes don’t feel as strong as they used to
-The car’s stopping distance is increasing
-Brake lining is damaged or worn down