A scissor car jack is a tool used to lift and lower cars. The jack is composed of two arms that are hinged at the middle, allowing the arms to be folded in against the body of the jack when not in use. When it is needed, the arms unfold and lock into place to provide a stable base for lifting and lowering the car.
How a Scissor Car Jack Works
A scissor car jack is a versatile tool that can be used to remove vehicles from ramps, driveways, and even parking lots. The jack is made up of two arms that rotate around a central pivot point. This allows the jack to come in contact with both the vehicle and the ground at the same time, providing maximum stability and traction.
To use a scissor car jack, first make sure that the surface you are using it on is level and firm. Next, place the arms of the jack onto either side of the vehicle. Make sure that the central pivot point is lined up with the axle or wheel of the vehicle. Finally, tighten the screws on either side of the jack to hold it in place.
Types of Scissor Car Jacks
There are two main types of scissor car jacks- the statically charged type and the electrically powered type.
Static Car Jacks: Static car jacks use electricity to grip the vehicle’s frame, preventing it from moving. They’re typically used on smaller cars that don’t have much weight or items inside of them that could cause damage if moved.
Electrically Powered Car Jacks: Electrically powered car jacks use a power cord to grip the vehicle’s frame. They’re more powerful and can be used on larger cars. They also come with a variety of features, such as an alarm that warns you when the jack is getting too close to the car, or a locking system so you can’t move the jack while it’s attached.
How to Use a Scissor Car Jack
The scissor car jack is a great tool for emergency repairs. It’s easy to use, and it can quickly lift a car. Here’s how to use it:
1. Position the car jack underneath the affected wheel.
2. Hook one end of the jack cable around the wheel, and the other end around the car jack handle.
3. Grasp the handle of the car jack and lift up on it, slowly lifting the car off of the ground.
4. When you’ve lifted the car off of the ground, release the cable from the wheel, and let go of the car jack handle.
Safety Tips when Using a Scissor Car Jack
When using a scissor car jack, it is important to take safety precautions to avoid injury.
First, always use caution when raising the vehicle with the jack. Be sure to watch for traffic and avoid blocking driveways or sidewalks.
Additionally, make sure the ground beneath the car is stable and free of any protrusions that could catch on the jack’s arms. Finally, do not use the jack if it is rain or snowing – these conditions can cause the ground to become icy and unstable.