As a carowner, you know that it’s important to keep your car in good working order. And one of the most basic maintenance tasks you can do is flush your brake fluid every 3 months or 3,000 miles, whichever comes first. But what about if you’re not sure when your next brake fluid flush is? Jiffy Lube can help.
What is a brake fluid flush?
If your vehicle has an automatic transmission, you may have noticed that the transmission seems more difficult to shift into gear. This is likely due to the fact that the fluid in the transmission has become dirty and clogged. A brake fluid flush is a good way to deal with this problem.
A brake fluid flush involves removing all of the old brake fluid from the system and replacing it with fresh fluid. This will clean out all of the dirt and debris that has built up over time, making the transmission much easier to shift into gear. In addition, brake fluid can help to prevent corrosion of the braking system components.
When is a brake fluid flush necessary?
A brake fluid flush is usually necessary when there is an increase in brake noise or when the brakes start to feel “soft.”
If you are not sure if your brakes need a brake fluid flush, it is best to take your car into a mechanic for a proper evaluation.
How to do a brake fluid flush at Jiffy Lube
Brake fluid flush is a great way to keep your brakes in good working order. This simple procedure can be done at any Jiffy Lube location.
Here’s how to do it:
1. Park the car in a safe place and disable the parking brake.
2. Open the hood or trunk and remove the cap cover on the left front wheel. (If there is no cap cover, the wheel may have been removed and disposed of.)
3. Remove the cap from the Brake Fluid Reservoir (usually located on top of the axle housing). Be careful not to spill any fluid!
4. Slowly pour about 1 cup of brake fluid into the Reservoir, being careful not to splash it all over yourself and the car. Replace the cap and tighten it securely.
5. Check for leaks by pressing down on each brake pedal while observing whether or not fluid starts to leak from any seals around the drum, calipers, or rotors. If there are no leaks, you’re finished! Drive cautiously until you’ve had a chance to test your brakes in a safe situation.”,”tags”:[“brake system maintenance”,”cleaning tips”,”jiff
What to expect during the brake fluid flush process
When your brake system needs a flush, you’ll likely visit your local Jiffy Lube location. Jiffy Lube is known for their quick and easy services, so the brake fluid flush is no exception. Here’s what to expect during the brake fluid flush process:
1. You’ll check in at the counter and give your name and vehicle information to the attendant.
2. The attendant will ask you to park your car in a designated area and will activate the parking sensors.
3. The attendant will then bring over a container of brake fluid that has been pre-mixed with detergent and water.
4. The attendant will ask you to open all of your car’s windows so that the fluids can be thoroughly flushed into the air conditioning system and under the car.
5. Once everything has been flushed, the attendant will close all of your windows and doors, turn off all of your car’s accessories, and return to the counter to complete the transaction.
Conclusion
Jiffy Lube does not recommend doing a brake fluid flush on your own. In fact, they advise against it completely. Jiffy Lube recommends that you bring your car in for a complete inspection and service if you experience any problems with your brakes. This includes anything from rotor wear to brake failure.